Quick start-up guide
23
• Drag-and-drop the RETA-02 Vendor object from the device
catalog to the PROFINET-IO-System. Also drag-and-drop the
Vendor Object PPO 6 to slot one.
Figure 4. Adding RETA-02 Vendor object to configuration
• Right click the device object and open the Object Properties
menu. Through this menu it is possible to change the device
name in the hardware configuration.
Note: The DCP configuration tool, like Step7 must be connected
to the Ethernet network to be able to set the name of the device.
Figure 5. RETA-02 object properties
To Next Page
Loading...
