Drive configuration
41
26 In/Out 1-4 src
Selects the source for the first four inputs and outputs when
PROFINET IO is used. User can map parameters to the first four
inputs and outputs with the initial record data of the IO controller or
by using the RETA-02 configuration parameters described above.
Initial record data has a parameter that can be used to select the
source in similar way.
0 = Initial record data (IO Controller assigns input and
output 1-4 values)
1 = RETA-02 configuration parameters 18-25 are used
2 = Disable (Use ‘Input/Output 1-4 parameter source
selection’ parameter of the initial record data to select
the source for the first four inputs and output)
To Next Page
Loading...
