ABB SACE Emax E4.2 - Page 181

ABB | SACE Emax 2
Accessories
1 - Overview
178 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
Electronic accessories
The following table shows the possible combinations of the electronic accessories:
Type of accessory Accessory
Trip units
Ekip Dip
Ekip
Touch
Ekip Hi-
Touch
Ekip G
Touch
Ekip G
Hi-Touch
Power supply Ekip Supply R R R R R
Connectivity
Ekip Com - R R R R
Ekip Com Redundant - R R R R
Ekip Com Actuator R R R R R
Ekip Link R R R R R
Ekip Signalling Modbus
TCP
R R R R R
Signal
Ekip Signalling 2K - R R R R
Ekip Signalling 3T - R R R R
Ekip Signalling 4K - R R R R
Ekip Signalling 10K R R R R R
Measurement and
Protection
Measurement enabler - R - - -
Measurement enabler
with voltage socket
- R S S S
Ekip Synchrocheck - R R R R
Rating Plug R R R R R
S.G.R. Toroid - R R R R
Rc Toroid - R R R R
External neutral sensor R R R R R
Display and
Supervision
Ekip Multimeter R R R R R
Ekip Control Panel R R R R R
Testing and
Programming
Ekip TT R S S S S
Ekip T&P R R R R R
Ekip Programming R R R R R
S: Standard. R: on request.
NOTE: Ekip Signalling 4K module available for E2.2-E4.2-E6.2 circuit-breakers.
Wiring diagrams
The internal connections of the circuit-breaker, the connections to the external terminal box of all
accessories and all related notes are indicated on the wiring diagrams.
There is one document and it is valid for all SACE Emax 2 CBs, with certain considerations distinguishing
the various models/versions also described on the actual diagrams:
• access to certain connections and accessories in the terminal box differs, depending on whether
the version is fixed or withdrawable
• Emax E1.2 can be fitted with three modules (one Ekip Supply + two other modules); E2.2-E4.2-E6.2
can be fitted with up to four modules (one Ekip Supply + three other modules)
• Ekip Signalling 4K module: Emax E1.2 does not have the connections for Q5...Q10 / Ekip Signalling 4K
Information about the wiring diagram is available in the website http://www.abb.com/abblibrary/
DownloadCenter/, especially in document 1SDM000091r0001.