ABB SACE Emax E4.2 - Electrical Characteristics

ABB | SACE Emax 2
6 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A Guide to the product choice | 1 - List for Emax 2 selection
Electrical characteristics
Service rated voltage
400 V AC
415 V AC
500 V AC
525 V AC
690 V AC
______ V AC
Rated uninterrupted current (40°C) (Iu)
100 A 800 A 2500 A
200 A 1000 A 3200 A
250 A 1200 A 4000 A
400 A 1250 A 5000 A
600 A 1600 A 6000 A
630 A 2000 A 6300 A
Ultimate short-circuit breaking capacity (lcu)
42 kA 120 kA
50 kA 130 kA
66 kA 150 kA
85 kA 200 kA
100 KA a ______ V:
Service short-circuit breaking capacity (lcs)
According to the reference standard:______ % of Icu
Admissible rated short-time withstand current (Icw)
Without intentional delay (class A)
With intentional time-delay (category B):
1 s Icw ______ kA
3 s Icw ______ kA
NOTE: make sure that the combination of all the electrical values selected is available. For
further details, consult Emax 2 catalogue available on the website http://new.abb.com/low-
voltage/products/circuit-breakers/emax2.