ABB SACE Emax E4.2 - Diagnosis Bar; Main Page

ABB | SACE Emax 2
Ekip Touch protection trip unit | 1 - Layout of the interface39 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
Diagnosis bar
The diagnosis bar is present on the main page and on level 2 pages, along the lower side of the display.
The bar appears as follows:
TC disconnected
Figure 5
The following table provides a description of the various areas of the bar:
Pos. Description
A
It shows the type of message:
•
Alarm
•
Warning, error, or prealarm
•
Information
•
Active timing
B It displays the active messages one by one in a loop.
C ABB logo.
Main page
To open the page, press the key HOME.
The page appears as follow:
Figure 6
The following table provides a description of the various areas of the page:
Pos. Function
A It opens the Histograms page.
B It opens the Menu page.
C It opens the Measuring instruments page.
D It opens the Measurements page.
E In the presence of messages, it opens the Alarm List page.