ABB SACE Emax E4.2 - Measurements; Integrated Functions: Self-Diagnosis, Test and Power Controller

ABB | SACE Emax 2
16 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A Introduction to Ekip trip units | 1 - Presentation
Measurements
The trip units include a huge range of measurements. As for the protections, availability and combinations
vary for each version of the trip unit:
Dip Touch
DISTRIBUTION GENERATORS
Dip Touch Hi-Touch G Touch G Hi-Touch
Dip Meas. Touch Meas. Touch Meas. Touch Meas. Touch Meas.
Ekip M.
Meas.
Ekip M.
Meas.
Ekip M.
Meas.
Ekip M.
Meas.
Hi-Touch
Meas.
Hi-Touch
Meas.
All the measurements are described by type:
Type Available measurements Page
Dip measurements
Currents, Trip History, Measurement History, Total Operations of the
circuit-breaker, Contact Wear
27
Touch measurements
Currents, Trip History, Measurement History, Peak Factor, Datalogger,
Total Operations of the circuit-breaker, Contact Wear
105
Ekip Measuring
Measurements
Voltages, Powers, Energies, Frequencies, Measurement History, Power
factor
110
Hi-Touch measurements Waveforms, Harmonics, Network analyzer 114
Integrated functions: Self-
diagnosis, Test and Power
Controller
All the protection trip units for Emax 2 integrate:
• Self-diagnosis: continuous monitoring of the state of the internal and external connections, with signalling
of any faults that may occur.
• Test: checking of the protections and of the other functionalities.
In addition, trip units of the Ekip Touch series can be supplied equipped with Power Controller to manage
the energy demand.
Dip Touch
Self-diagnosis
Test
Power Controller
DISTRIBUTION GENERATORS
Dip Touch Hi-Touch G Touch G Hi-Touch
The additional functions are described for each protection trip unit:
Trip units Available functions Page
Ekip Dip Test, self-diagnosis 28, 29
Ekip Touch Test, self-diagnosis, Power Controller 118, 120, 131