ABB Terra 94 - Overview of the EVSE, Outside

2.3.2 Overview of the EVSE, outside
N
J
K
I
H
G
F
A
B
C
D
M
L
C
E
A Left door
B Type plate
C Air inlet
D Cover on the air outlet
E Border cover
F EV charge cable outlet and holder (1x
or 2x)
G Plate over the RFID reader and the
integrated payment terminal
H Emergency stop button
I Touchscreen
J Front door
K Enclosure
L Antenna
M Right door
N Air outlet
Part Function
Front, left and right door To give authorized personnel access to the inside of the
EVSE
Type plate To show the identification data of the EVSE. Refer to sec-
tion 2.1 .
Air inlet and outlet To let cooling air in and out. The airflow makes sure that
the parts on the inside of the EVSE do not become too
hot.
Cover on the air outlet To prevent a blockage of the air outlet
Border cover To cover the lower part of the EVSE
EV charge cable outlet and
holder
To connect and hold the EV charge cable. Refer to section
2.7 .
RFID reader To read the information from an RFID card
Payment terminal To pay for the charge session
Emergency stop button To stop the EVSE when there is an emergency
Touchscreen To control and monitor the charge session
Description
BCM.S1101.0-EN | 001 13