Firmware Update
By accessing to the Firmware Update sub-menu you can upgrade the
rmware of the inverter and his components selecting a Remote rm-
ware Update or a Local rmware Update.
Perform the update during good irradiation conditions (avoid the dawn and dusk hours).
An interruption of updating process could damage the inverter!
• Remote rmware Update:
- In remote mode, the rmware will update automat-
ically, searching the last available rmware on ABB
servers, by clicking the “CHECK” button.
- After the nish of the checking process the availa-
ble release will be notied on the bottom part of the
section
- Click on “UPDATE” button to start with the updating
process.
• Local rmware Update:
By updating in local mode, the rmware have to be selected and upload-
ed from local folder of the used devices to access to the web server.
The latest rmware version is available from the download area of the
website www.abb.com/solarinverters or from https://registration.
abbsolarinverters.com
- Click on “FW SELECT” and select the rmware
package previously downloaded.
- Click on “UPDATE” button to start with the updating
process.
To Next Page
Loading...
Need help?
General