ABB UNO-DM-1.2-TL-PLUS-Q User Manual

- 18 -
000982AG
3 - Characteristics
Models and range of equipment
The models of single-phase inverters covered by this manual are divided
for their maximum output power:
1.2kW, 2.0kW, 3.0kW, 3.3kW, 4.0kW, 4.6kW and 5.0kW.
For each model, the following variants are available (sufx could be com-
bined):
- Standard Models (e.g. UNO-DM-3.3-TL-PLUS-B-Q).
Models equipped with Wireless communication (-B sufx).
- Models with “S” sufx (e.g. UNO-DM-3.3-TL-PLUS-SB-Q).
Models equipped with DC disconnecting switch
16
.
- Models with “X” sufx (e.g. UNO-DM-3.3-TL-PLUS-X-Q).
Models equipped with Accessory Board (UNO-DM-COM KIT)
18
.
- Models with “U” sufx (UNO-DM-5.0-TL-PLUS-SB-QU only).
Unbalanced input channels (UNO-DM-5.0-TL-PLUS model only).
The choice of the inverter model must be made by a qualied technician who knows about
the installation conditions, the devices that will be installed outside the inverter and possible
integration with an existing system.

ABB UNO-DM-1.2-TL-PLUS-Q Specifications

General

Brand	ABB
Model	UNO-DM-1.2-TL-PLUS-Q
Category	Inverter
Language	English