- 8 -
000913AG
Safety information and instructions
This chapter contains the safety instructions which you must obey when
you install and operate the inverter and perform maintenance operations
on the inverter. Obey these safety instructions to prevent injury or death,
or damage to the equipment.
The instructions provided in the manual do not replace the safety devices
and technical data for installation and operation labels on the product,
and they do not replace the safety regulations in force in the country of
installation.
The operators must read and comply with the technical information and
instruction provided in the manual and in the attached documentation.
ABB accepts no liability for failure to comply with the instructions for
correct installation and cannot be held responsible for the upstream or
downstream equipment.
Specic safety information are provided during installation, commissio-
ning and maintenance operation instructions. Always follow the reading
order of instruction exactly as described in this manual.
1
Safety and accident prevention
To Next Page
Loading...
Need help?
General