An additional Wireless Identication label is provided.
The label displays the following information:
SN WLAN: SSSSSSSSSS
PN WLAN: PPP.PPPPP.PP
MAC: XX:XX:XX:XX:XX:XX
SN Inverter: SSSSSSSSSS
MAC: XX:XX:XX:XX:XX:XX
PK: KKKK-KKKK-KKKK-KKKK
Remove and apply
on the Quick
installaon guide
1
2
3
6
5
3
4
1. WLAN board Serial Number
2. WLAN Board Part Number
3. WLAN Board MAC address:
- To be used to obtain the SSID of the wireless access point created
by the inverter: ABB-XX-XX-XX-XX-XX-XX (where “X” is a hex digit
of the MAC address).
- To be used to obtain the “Host Name”: http://ABB-XX-XX-XX-XX-XX-
XX.local (where “X” is a hex digit of the MAC address).
- MAC address it’s the only required information to register the invert-
er with Aurora Vision.
4. Inverter Serial Number
5. Product Key:
- To be used as the password of the wireless network generated by
the inverter (Access Point) or as a username and password to ac-
cess the internal web server if the credentials have been lost
6. QR code to be used for commissioning
The Wireless Identication label is divided in two separate parts by a dashed line; take the
bottom part and apply it on the cover page of the quick installation guide.
The ofcially required information is located on the Regulatory label. The Wireless Identica-
tion label is an accessory label which shows the information necessary for the identication
and characterisation of the inverter by ABB.
The labels are NOT to be hidden by foreign objects and parts (rags, boxes, equipment, etc.);
they must be regularly cleaned and always kept in sight.
To Next Page
Loading...
Need help?
General