Pre-commissionig phase 2 - Internal web UI access
DEVICE USED TABLET/SMARTPHONE:
• SCAN this QR code (it is also reported in the Quick installation guide
and in the pre-commissioning yer inside the box of the inverter).
DEVICE USED LAPTOP:
• Open an internet browser (reccomended browser: Chrome versions
from v.55, Firefox versions from v.50) and enter the pre-set IP address
192.168.117.1 to access the setup pages (web user interface).
STEP BY STEP COMMISSIONING WIZARD:
The language of the wizard could be changed by clicking on the upper status bar
STEP 1 - Administrator/User login credentials
-
Set the Administrator account user and pas-
sword (minimum 8 character for password):
Administrator account can open and view the contents
of photovoltaic site. Additionally, they can make changes
to inverter settings. User and password are CASE SEN-
SITIVE.
-
Set the User account user and (optional) pas-
sword (minimum 8 character for password):
User account can only read data. It cannot make any
changes. User and password are CASE SENSITIVE.
To Next Page
Loading...
Need help?
General