2106001MNAA | XSERIES G5 START UP GUIDE | 67
d. Verify that the XFC or XRC Network ID displays in the list of
detected devices (see
Figure 10-13: PCCU Connection Setup for
Bluetooth). If unable to detect the XFC or XRC device, see
section 13: Troubleshooting.
e. Select the device on the list and highlight.
f. Click Select.
Figure 10-13: PCCU Connection Setup for Bluetooth
17. Click Close to exit PCCU connection setup.
18. On the top PCCU menu, click the Entry icon to connect to the XFC or
XRC.
19. When the connection is successful, continue with configuration
procedures or click Close to close the Bluetooth connection.
20. For further configuration or changes to the Bluetooth setup, refer to
the user manuals or Bluetooth help topics.
To Next Page
Loading...
