ABB XIO-00 - Missing or Incorrect XIO Serial Port

114 | XIO USER MANUAL | 2106424MNAB
Figure 6-16: Configure TCP port
6.3.2 Missing or incorrect XIO serial port
Configure the Ethernet-Serial Passthrough instance for the correct port and attached device type.
To verify or assign the correct XIO COM port and device type:
IMPORTANT NOTE:
The XIO supports pre-configured communication parameter values for several
ABB peripherals.
When connecting the XIO COM port to one of these devices, selecting the correct
attached device type uses the optimal values to communicate with that device. For third
-party
peripherals, select
Other
and consult the vendor documentation for optimal values. Incorrect device
type configuration prevents communication beca
use of mismatched device and port settings.