ABB XIO-00 - System Restart

XIO USER MANUAL | 2106424MNAB | 169
Figure 8-26: Software update complete (OS and Flash)
IMPORTANT NOTE:
Updates to the main application (App) might require an update to PCCU32.
In these cases
, download a new version of PCCU32.
8.5 System restart
The XIO has several options for restart. This section provides an overview of those options and the
corresponding procedures for manually-triggered restarts.
NOTICE
– Data loss. Some of the restart procedures in this section cause customer data, device
configuration or calibration data loss.
To b ack up data and configuration, see section 8.1 Preserve
data and configuration
.
8.5.1 Restart type overview
There are several ways to restart an XIO. Restarts can be manually triggered or performed automatically
after software updates, power removal, or other system events. Perform manually triggered restarts
onboard or from the user interface (PCCU).
Tab le 8-1
describes device restarts. Review the implications of each restart type carefully to select the
appropriate method. There may be several methods for the same type of restart.
IMPORTANT NOTE:
While there are several methods for the warm and cold restarts, ABB
recommends restart
s from PCCU32 (Entry mode or device loader).