ABB XIO-00 - Restore the Device Configuration

XIO USER MANUAL | 2106424MNAB | 161
Figure 8-15: Locating saved configuration (default directory)
8.2 Restore the device configuration
Use the device loader to restore the configuration on the device with a previously saved configuration
package. Verify that the configuration package originated from the same unit. Then restore the device in
the event of file corruption or other problems.
To restore the device configuration file:
NOTICE
– Loss of data. When you restore the configuration, the loader sends the configuration
package to replace the
device’s existing startup configuration. The device automatically uses the
new startup configu
ration to restart (cold restart) and removes the previous startup configuration.
Before restoring
the configuration on the device, perform the procedure in section 8.1.1 Collect data
to
collect the trend data (if trends are configured) and avoid data loss. It might be necessary to
preserve
the existing configuration if technical support needs to troubleshoot configuration issues.
If
necessary
, perform the procedures in section 8.1.2.1 Update the startup (cold) configuration and
section
8.1.2.2 Save the startup (cold) configuration to the PC or laptop.