ABB ZEE600 - Page 65

• Sort and filter the cells in Runtime.
• Save the filtering and sorting in the filter profiles.
• Hold down the right mouse button to change the column width.
• Drag columns to rearrange them.
4. Manage filters.
• In the Filter Profile list, select a filter to be applied.
• In the Filter Profile text box, type a name and click Save to save the
current settings as a filter profile.
The filter profile name can be a maximum of 31 characters
long and must only contain valid characters. The
prohibited characters are: ! \ / : * ? < > | ""
• Click Import to import filter profiles from export file.
• Click Export to export filter profiles in the file.
• Click Delete to delete the selected filter profile.
5. Under Variables, add or remove variables.
• Click Add to add a variable to the variable list in Runtime.
• Click Release to remove a variable from the variable list in Runtime.
6. Under Actual value, manage the updating of current variable values.
• Click Refresh on to switch on automatic updating of current variable
values.
• Click Refresh off to switch off automatic updating of current variable
values.
• Click Refresh now to update the current values of the variables.
7. Under Write set value, select which set values are written to the hardware.
• All variables
• Selected variables
8. Under View, select the variable list value format.
• Decimal
• Hexadecimal
• Binary
• Octal
• Exponential
2NGA000149 A Section 3
Operating the system
ABB ZEE600 59
Operation Manual