22
Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
ENGLISH
Waiting for Result
• Do not pull the test strip away until you
see the short line moving clockwise on your
meter screen and you may hear
one beep (if
your sound volume is on). This means you
have enough blood and the meter is reading
your glucose.
• If after five seconds your meter does not show a short line
moving around the display screen, the sample may be too
small. You may add blood to the same Test Strip Edge from
which you started for up to 60 seconds from the time of the
first application.
• Your blood glucose test result is shown on
the display screen. If the sound volume is on
you will hear two beeps.
•
The time that the meter takes depends on
your blood glucose level. The higher your
glucose level, the longer it takes to get a result.
4
• Do not press the test strip against the test site.
•
Do not scrape the blood onto the test strip.
•
Do not apply blood to the flat side of the test strip.
• Do not apply blood to the test strip when the test strip
is out of the meter.
•
Do not put blood or foreign objects into the test strip port.
To Next Page
Loading...
