23
ENGLISH
5
Removing the Lancet
When you have finished testing, snap off the
cap from the lancing device.
Pinch the white clip that holds the lancet until
the lancet falls out.
• Do not press the test strip against the test site.
•
Do not scrape the blood onto the test strip.
•
Do not apply blood to the flat side of the test strip.
• Do not apply blood to the test strip when the test strip
is out of the meter.
•
Do not put blood or foreign objects into the test strip port.
Potential Bruising
It is possible you may experience bruising at the test site. If bruising
does occur, you may choose to lance another test site.
Maintenance
Use isopropyl alcohol or soap and water to wipe the outside of the
lancing device. If you wish, remove the cap, wash it in warm water
and rinse well.
Important:
Do not immerse the body of the lancing device in water
or any other liquid.
To Next Page
Loading...
