Ma in t e nan c e | Dec l a rati on o f Con f o r m i t y, D ec l ar a t ion o f I n c orp o rat i o n
106
DECLARATION OF CONFORMITY, DECLARATION OF INCORPORATION
This declaration applies as a Declaration of Conformity if the chain hoist is operated as an independent machine. It is
also valid as a Declaration of Incorporation in terms of the machinery directive of Appendix II 1B if the chain hoist is
installed in another machine. It is then prohibited to put the chain hoist into service until it has been ascertained that
the equipment into which the chain hoist is to be installed meets all requirements of the EU directive versions
applicable at the time of issuance. If the chain hoist is part of an ABUS crane installation, the Declaration of
Conformity in the test log book of the crane is valid. The declaration here is then invalid.
Manufacturer
ABUS Kransysteme GmbH
Sonnenweg 1
51647 Gummersbach, Germany
Product
ABUS Chain Hoist
GM2, GM4, GM6, GM8
in series design
Year of construction From 2012
Order number and serial number See title page
Person responsible for putting together the
special technical documentation
Michael Müller
Technical Documentation Department manager
ABUS Kransysteme GmbH
Sonnenweg 1
51647 Gummersbach, Germany
We hereby declare than the product
specified above complies with all
requirements in the EU directives listed
here in the version applicable at the time of
issuance.
2006/42/EC Machinery
2014/35/EU Low voltage
2014/30/EU Electromagnetic compatibility
In particular, the harmonised standards and
national standards, directives and
specifications and any other applicable
standards have been applied.
EN ISO 12100 Safety of machinery, devices and systems
EN 61000-6-4 Electromagnetic compatibility; Emission standard
for industrial environments
EN 61000-6-2 Electromagnetic compatibility; Immunity for
industrial environments
EN 60204-32 Electrical equipment of machines, hoisting
equipment
DIN EN 14492-2 Cranes, power-driven winches and hoists
FEM 9.511 Classification of the drives
FEM 9.671 Chains for hoists
FEM 9.683 Selection of hoist and travel motors
FEM 9.755 Measures for achieving safe working periods
FEM 9.811 Requirement specification for electric trains
Technical documentation is available in full.
The corresponding operating manuals are available in the national language of the user.
With our department for “Technical Documentation”, we have committed ourselves to submitting the specific
documentation for the incomplete machine in response to a reasoned request by the market surveillance authorities.
Gummersbach Germany, 14th June 2023
Head of the Development department
Gerald Krebber
___________________________
Signature of the authorised person
The content of this declaration complies with EN ISO 17050.
ABUS Kransysteme GmbH supports a quality management system in accordance with DIN EN ISO 9001.
To Next Page
Loading...