Abus ABUCompact GM2 - A B U S S E R VI C

Ma in t e nan c e | AB U S S e r vi ce
90
ONLY FOR GM6
TAB WASHER FOR BOLT ON CHAIN
ANCHOR POINT
─ Fillister-head screw M5x10
─ 3 Nm
─ Only the chain hoist GM 6 has a separate
fillister-head screw for the tab washer.
─ With the chain hoists GM2 and GM4, the
fillister-head screw below on the left of the
brake bearing shield is used to attach the
tab washer.
─ With the chain hoist GM8, the chain anchor
point is designed differently and requires no
tab washer.
ABUS SERVICE
ONLY IN GERMANY
If available, have the product number, serial
number and customer number handy.
Call the ABUS Service Centre:
─ Phone: +49-2261-37-237
If calling outside the usual business hours,
leave a message on the answering
machine.
● ABUS Service will return your call promptly.
If necessary, send a description of the
problem by fax or e-mail:
─ Fax: +49-2261-37-265
─ E-mail: service@abus-kransysteme.de
ONLY OUTSIDE GERMANY
Call the local ABUS branch or crane service
partner.
Your local ABUS branch or crane service
partner will provide details of contact data,
contacts and availability.