Abus ABUCompact GM2 - L U B R I C a N T; Chain Sprocket

Ma in t e n an c e | L u b r i ca n t s
85
LUBRICANTS
Note:
Synthetic lubricants may not be mixed with mineral-
based lubricants!
CHAIN
On-site lubrication with “Chainlife S”, ABUS item
number 2717
Lubrication ex works with “Chainlife S”, ABUS item
number 2718.
Alternatives:
─ Castrol “Viscogen KL 23”
─ Klüber “Grafloscon CA 901 Ultra Spray”
─ Optimol “KL 23”
─ Shell “Malleus GL 95”
Lubricate the chain during:
─ installation
─ Regular inspection
─ Exchanging the chain and chain sprocket
For details, see “Lubricating the chain”, page 65.
CHAIN SPROCKET
On-site lubrication with “High-Lub LT1 EP”, ABUS
item number 318490.
Lubrication ex works with “High-Lub LT1 EP”, ABUS
item number 317880.
Lubricate the chain sprocket during:
─ Exchanging the chain and chain sprocket
For details, see “Assembling a new chain guide”,
page 50.
OUTPUT SHAFT ON GEAR UNIT
On-site lubrication with “High temperature paste PBC
1574”, ABUS item number 6758.
Lubrication ex works with “High temperature paste
PBC 1574”, ABUS item number 1571.
Lubricate the output shaft during:
─ Installation of the gear unit
For details, see “Installing the gear unit”, page 79.