Abus ABUCompact GM2 - Page 86

Ma in t e nan c e | L u b r i can t s
86
GEAR UNITS GM2 AND GM4
Lubrication ex works using lubricant with the standard
designation CLP ISO VG 460 DIN 51502.
Quantity, GM2: 200 cm³
Quantity, GM4: 350 cm³
The gear unit is lubricated for its entire service life.
GEAR UNIT GM6
Lubrication ex works using lubricant with the standard
designation CLP ISO VG 680 DIN 51502.
Quantity: 700 cm³
The gear unit is lubricated for its entire service life.
GEAR UNIT GM8
Lubrication ex works using lubricant with the standard
designation CLP ISO VG 680 DIN 51502.
Quantity: 1700 cm³
The gear unit is lubricated for its entire service life.
ONLY FOR TWIN-FALL CHAIN
HOISTS
DEFLECTION ROLLER ON THE
BOTTOM BLOCK
Lubrication on-site/ex works with “Klüber Staburags
NBU 12 Alltemp”, ABUS item number 14980.
Lubricate the deflection roller during:
─ Installation of the bottom block
For details, see “Installing the bottom block”,
page 66.
LOAD HOOK ON THE BOTTOM
BLOCK
On-site lubrication with “High-Lub LT1 EP”, ABUS
item number 318490.
Lubrication ex works with “High-Lub LT1 EP”,
ABUS item number 317880.
Lubricate the load hook during:
─ Installation of the bottom block
For details, see “Installing the bottom block”,
page 66.