110
English
independently via a DynDNS provider. If the network camera is positioned behind a router, we recommend
using the DynDNS function on the router.
The following diagram offers an overview of accessing and updating the IP address using DynDNS.
DDNS: Activates or deactivates the DDNS function.
Server name: Select a DDNS service provider here. You must have registered access for this
DDNS service provider (e.g. www.dyndns.org).
User ID: User ID for the DDNS account.
Password: Password for the DDNS account.
Re-type password: The password must be confirmed here.
Host name: Enter the registered domain name (host service) here (e.g.
myIPcamera.dyndns.org).
Setting up a DDNS account
Set up a new account as follows under DynDNS.org:
DynDNS.org
Name Server
192.168.0.3
195.184.21.78 name.dyndns.org
195.184.21.78
LAN WAN
Internet
DynDNS
access data
To Next Page
