126
Once you have selected the desired data type, the dump is initiated via STORE.
MIDI DUMP RX
If you want to send MIDI data to the Virus, you don’t have to log in first. The Virus automatically
accepts incoming data via its MIDI In port. However, you can determine where the data of a com-
plete incoming bank is stored. In contrast, single sound are always first dumped in the Edit buffer;
you have to manually store them somewhere else, otherwise they are deleted by the next program
change.
SINGLE BANK A
All 128 sound programs of Bank A are sent.
SINGLE BANK B
All 128 sound programs of Bank B are sent.
MULTI BUFFER
This option dumps the data of the MULTI program that you are currently
processing (the MULTI’s Edit buffer). Please bear in mind that, with this
option, merely the MULTI parameters and not the associated SINGLE
sounds are transmitted.
ARRANGEMENT
The current MULTI and the SINGLE programs involved can be transmitted
in one go with this option. To shorten the amount of time that this dump
takes, only the sounds of those PARTs whose Part Enable option is set to
On are sent.
MULTI BANK
All MULTI programs are transmitted with this option. Please bear in mind
that, with this option, merely the MULTI parameters and not the associated
SINGLE sounds are transmitted. If you want to save all data of the Virus to
a sequencer, you can select the ”Total” dump option.
Mode Description
DISABLE
Incoming data via MIDI IN is ignored.
ENABLE
Bank data is re-loaded to the bank from which they were originally
dumped, regardless of which bank is currently selected.
FORCE TO BANK A
Bank data is loaded to Bank A exclusively.
FORCE TO BANK B
Bank data is loaded to Bank B exclusively
Mode Description
To Next Page
Loading...
