VIRUS CLASSIC MANUAL 127
Global And System Parameters
GLOBAL CHANNEL
Selects the MIDI channels for SINGLE MODE and the program switching option for entire MULTI
PROGRAMs in MULTI MODE. In MULTI SINGLE MODE, the MULTI MODE switching option is
locked (permanently deactivated). The number in the upper left of the display shows the MIDI Glo-
bal Channel in Single Mode and the current Partnumber if the Virus is in MULTI MODE or MULTI
SINGLE MODE.
FORCE TO EDIT
Loads the single programs of the bank to the Edit buffer one by one,
whereby the each preceding single sound is deleted by the one following it.
This function treats a bank dump as a succession of single sounds and
comes in handy when you want to search an unfamiliar bank or load single
sounds without having to load the entire bank.
VERIFY
Compares an incoming MIDI dump to the memory content of the Virus. It
checks if a dump was recorded properly on the sequencer and if it can be
played back correctly. Load data from the sequencer into the Virus while
“Verify” is enabled. The Virus’ display will indicate if the device is actually
receiving data and it will call your attention to any transmission errors that
may occur. Data stored in the Virus remains unaffected by this operation.
Mode Description
To Next Page
Loading...
