Accu-Chek ACTIVE User Manual

62
Technical data and system components
14
System components
The Accu‑Chek Active blood glucose monitoring system comprises the following components in addition
to the meter:
Accu-Chek Active test strips
Use only these test strips when you test blood glucose using the Accu‑Chek Active meter.
Accu-Chek Active control solutions
Use only these control solutions when you carry out control tests using the Accu‑Chek Active meter
and the respective test strips.
Please ask your customer support and service centre where you can obtain test strips and control
solutions.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH