Accu-Chek ACTIVE User Manual

10
Changing settings
3
31 2
Changing settings
Overview
You can make changes to the meter settings for the time format, time, date and beep.
The meter is delivered with the date and time pre‑set. You may need to adjust the settings to your time
zone. In order to analyse your saved test results properly, it is necessary to set the correct time and date.
Press the S button for longer
than 2 seconds.
The display above appears on
the display.
When appears on the
display, it is possible to make
changes to the settings.
The setting which can be now
changed begins to flash.
You can now adjust the time
format (24h or 12h).
Press the M button.
The changed time format
appears on the display.
Turning the meter on Changing settings

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH