7
2
Steps before testing
Steps before testing
Unpacking the contents
Check that the contents of the package are complete. You will find a list with the contents on the box.
If anything is missing, please contact your customer support and service centre (see page 63).
Checking the unit of measurement
Test results can be displayed in two dierent units of measurement (mg/dL or mmol/L). Two dierent
versions of the same meter are therefore available. Check if your meter displays the unit of measurement
you are accustomed to. You can find the unit of measurement that your meter displays on the type plate
on the back of your meter
1
. If you do not know which is the right unit for you, ask your healthcare
professional.
W
The unit of measurement that
your meter displays cannot be
changed. If the wrong unit of
measurement is printed on the
type plate, ask your dealer/
pharmacy to exchange the
meter or contact your
customer support and service
centre. An incorrect unit of
measurement could lead to
test results being interpreted
falsely and to the wrong
therapy recommendations and
so produce serious adverse
health eects.
1
To Next Page
Loading...
Need help?
General
