153
5
To Change the Target Range:
j Select the entry eld for the
lower value of the Target
Range and press =.
j Set the value and press =.
j Select the entry eld for the
upper value of the Target
Range and press =.
j Set the value and press =.
To Change the Carb Ratio:
j Select the entry eld for the
number of Insulin Units and
press
=.
j Set the number of Insulin Units
and press =.
j Select the entry eld for the
amount of Carbs and press
=.
j Set the amount of Carbs
covered by the number of
Insulin Units and press =.
To Change the Insulin
Sensitivity:
j Select the entry eld for the
number of Insulin Units and
press
=.
j Set the number of Insulin Units
and press =.
j Select the entry eld for the
Insulin Sensitivity level and
press =.
j Set the Insulin Sensitivity level
and press =.
j Press ..
6.
The carb ratio and insulin
sensitivity are copied to all time
blocks. You may edit the target
range, carb ratio, and insulin
sensitivity for any other time
block, if necessary.
j Press ..
To Next Page
Loading...
Need help?
General
