187
5
4.
To Change the End Time:
j Select the End Time entry eld
and press =.
j Set the End Time and press
=.
To Change the Target Range:
j Select the entry eld for the
lower value of the Target
Range and press
=.
j Set the value and press =.
j Select the entry eld for the
upper value of the Target
Range and press =.
j Set the value and press =.
To save the changes and
return to the Time Blocks
screen, press
..
5.
j Repeat Steps 3 and 4 to
change another time block.
Otherwise, press , to return
to the Settings screen.