7
223
i NOTES:
• Alkaline batteries are recommended for use with the meter.
• After you change the batteries, the meter prompts you to confirm the time and date settings.
• It is a good idea to have spare, packaged batteries available.
• All test results, diary information, and settings are saved in the meter memory when the batteries are
replaced.
• Rechargeable batteries may be used in the meter. However, rechargeable batteries may not maintain
the same battery life as non-rechargeable batteries.
• When the Low Battery warning appears:
• If vibrate is set to On, it is disabled until the batteries are replaced.
• I f the backlight level is set to high, the medium backlight level is used until the batteries are
replaced.
• If the beeper level is set to high, the medium beeper level is used until the batteries are replaced.
To Next Page
Loading...
Need help?
General
