230
Display Shows Possible Cause(s) Possible Solution(s)
Beep/Vibrate Off j Beep and Vibrate settings
cannot be turned off at the
same time.
j Ensure that either the Beep or Vibrate setting is
turned on. See Chapter 5, “Changing Meter
Settings.”
Below Hypo
Warning Limit
j Your test result is below the
hypo warning limit set in the
meter.
j Treat your low blood sugar as recommended by
your healthcare professional.
j The meter displays a recommended number of
carbohydrates for you to eat, and then retest your
blood sugar.
Bolus Advice Not
Setup
j
Advice is not provided unless it
is set up through Bolus Advice
in Settings Menu.
j
You can continue to use the meter without bolus
advice or see Chapter 5, “Changing Meter Settings”
for instructions on how to set up bolus advice.
Bolus Advice
Timeout
j
Bolus advice is no longer
available for this bG result.
j
Review data that was saved in My Data. Then, decide
to modify data, add data, or begin a new bolus advice
session.
To Next Page
Loading...
Need help?
General
