66
Insert Test Strip > Match Code Number > Test Control Solution > Control Result
1.
j Insert the golden end of a
test strip into the meter in the
direction of the arrow. The
meter turns on.
2.
Match Code to Vial
Code
015
bG Test
j Ensure the code number
on the display matches the
code number on the test strip
container. If you miss seeing
the code number, remove the
test strip and reinsert it into
the meter.
3.
The Apply Sample screen
appears. The test strip is ready
for testing.
45702_std.indb 66 10/29/09 1:42:10 PM