Accu-Chek Aviva User Manual

10
Before You Start Testing
About the Meter and Test Strips
WARNING
• Carefully read and follow the instructions in the Owner’s Booklet and Package Inserts for the
test strips and control solutions. It is very important to follow the instructions in order to prevent
a wrong result or improper treatment.
• Inspect the container of test strips before using the test strips for the first time. If you see any
damage to the container cap or if anything prevents the cap from closing properly, do not use
the test strips. Contact the ACCU-CHEK Customer Care Service Center. Damaged test strips can
cause inaccurate results, which could lead to improper treatment.
• The meter, test strips, and control solutions are only for use outside the body (in vitro). Do not
eat the test strips. Do not swallow or inject control solutions or use control solutions for any
purpose other than testing the ACCU-CHEK Aviva Plus system.
NOTE
• Set the time and date on your meter before you begin testing.
• Although you always apply fresh capillary whole blood to the test strip, your system has been
calibrated to deliver plasma‑like values for easier comparison to lab results.

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity