15
Adjusting the Time and Date – First Time Use
The meter is preset with the time and date which may need to be adjusted to the local time zone. Setting
the correct time and date in the meter is important to review the results in memory or to download the
results to a computer.
1. Press and release to turn
on the meter. The time and
date appear on the display.
“Set‑up” and the hour flash. If
the correct time and date are
displayed, press and hold
to exit the set‑up mode.
2. Press and release
or to
decrease or increase the hour.
Press and hold
or to
scroll faster.
3. Press and release
to set
the hour. The minutes flash.
decrease increase
To Next Page
Loading...
