Accu-Chek Aviva User Manual

57
Setting the Beeper On/OFF
The meter beeper is preset to “On.” Setting the beeper to “OFF” does not aect test results .
The beeper is helpful because it prompts you:
• To apply blood or control solution to the test strip
• When enough blood or control solution is drawn into the test strip
• When the test is complete
• When a button is pressed
• When it is time to test (if you set test reminders)
• If an error occurred while testing (even if the beeper is o, it still beeps for an error)
TIME / DATE
(hrs, min, am/pm,
month, day, year)
BEEPER
(on/o)
TEST REMINDERS
(A‑1, A‑2, A‑3, A‑4)
HYPO ALERT
(o, on, level)
You are here

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity