Accu-Chek Aviva - Page 63

61
5. If “On” is selected, the
hour flashes. “A‑1”
and the bell symbol
remain on the display.
6. Press and release
or to select
the hour. Press and
release
to set the
hour.
7. The minutes flash.
Press and release
or to select
00, 15, 30, or 45.
These are the only
choices.
8. Press and release
to set the minutes.
“am” or “pm” flashes
on the display.
9. Press and release
or to switch
between “am” and
“pm.” Press and
release
to set
“am” or “pm."
10. The next test
reminder “A‑2” and
“set‑up” flash on the
display with “OFF”
and the bell symbol.
You can set
additional test
reminders or press
and hold
until
you see the flashing
test strip symbol to
exit the set‑up mode.