Accu-Chek Aviva User Manual

66
4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable (computer) or PDA.
6. Place the meter on a flat surface. Point the 2 IR windows toward each other. They
should be 1–4 inches apart.
7. Do not move the infrared cable (computer), PDA, or meter during the transfer.
8. Follow the prompts on the software.
9. The software program may shut o the meter automatically when the data transfer
is complete. Should this occur, follow the prompts on your display.
NOTE
• If the data did not transfer successfully, try again. If you still have problems, contact the ACCU‑CHEK
Customer Care Service Center at 1‑800‑858‑8072.
• To make the most of the download feature, you must set the time and date in the meter correctly.
Infrared (IR) Window

Accu-Chek Aviva Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Coding	No coding required
Battery Life	Approximately 1000 tests
Memory	500 test results
Battery Type	1 x 3V lithium (CR2032)
Operating Humidity	10% to 90% RH
Meter Weight	59 g
Measuring Range	10 mg/dL to 600 mg/dL
Automatic Shut Off	After 90 seconds of inactivity