112
Using the meter as an electronic notebook
i
If a large number of results were saved within one period, calcu-
lation of the average may take a while.
flashes in the display
while the calculation is in progress.
i
If no results were saved in memory for the period in question,
three horizontal bars
are displayed instead of a numeri-
cal value. If, for example, the results are more than 7 days old,
the average, lowest value and highest value cannot be calculated
for 7 days.
i
The meter can only perform the necessary calculations as long
as the results were stored together with the time and date. If you
have not entered the time and date, three horizontal bars
are displayed instead of the numerical values.
i
In the event that you changed the date or time, then performed a
test and afterwards re-set the date/time, the meter only includes
results it saved in uninterrupted chronological order. If the chron-
ological order was interrupted, the earlier results are ignored. If
you have not performed any tests since you made the change,
three horizontal bars
are displayed instead of a numeri-
cal value.
AC_CP_LCM_Manual_EN-UK final.indd 112_CP_LCM_Manual_EN-UK final.indd 112 20.6.2007 11:04:2420.6.2007 11:04:24
To Next Page
Loading...
Need help?
General
