36
Initial steps before testing
2.3.2 Indication of the number of test strips remaining
Each time you turn the meter off with the Test button, it shows you the
number of test strips remaining in the drum. The number of remaining
strips continues to be displayed as long as you hold down the Test
button.
In this example there are still 12 test strips in the drum.
When you release the Test button, the meter turns off.
Notes
i
If the test strip drum contains three or fewer test strips following
a test, the number, the test strip symbol and drum symbol flash in
the display window.
i
If you press the Test button only briefly when turning the meter
off, the number of test strips remaining is displayed only briefly
or not at all.
AC_CP_LCM_Manual_EN-UK final.indd 36_CP_LCM_Manual_EN-UK final.indd 36 20.6.2007 11:04:0220.6.2007 11:04:02