122
Acoustic Mode
6.1 Beep tones at power-on
When Acoustic Mode is set to on, you hear a long beep ( — ) when you
turn on the meter.
This is irrespective of which button you use to turn the meter on:
앫 the Test button in order to perform a test (see Chapter 4.3.1)
앫 the S button in order to change settings (see Chapter 3)
앫 the M button in order to retrieve results from memory (see Chap-
ter 5)
앫 the M and S button in order to send results (see Chapter 5.4)
If you press the Test button or M button to turn the meter on, you first
hear the long power-on beep followed by 6 further beeps spaced as
1 – 2 – 3 ( – – – – – – ).
AC_CP_LCM_Manual_EN-UK final.indd 122_CP_LCM_Manual_EN-UK final.indd 122 20.6.2007 11:04:2720.6.2007 11:04:27
To Next Page
Loading...
