21
Initial steps before testing
2
2.2.1 Type plate
The type plate on the back of your meter indicates which unit of mea-
surement your meter uses.
2.2.2 Display check
You can check the unit of measurement your meter uses by performing
a display check.
Press and hold down the M button.
The meter turns on. While you hold down the M button, you first see the
display check.
mmol/L meter or mg/dL meter
The unit of measurement is shown in the bottom right corner of the dis-
play.
AC_CP_LCM_Manual_EN-UK final.indd 21_CP_LCM_Manual_EN-UK final.indd 21 20.6.2007 11:03:5820.6.2007 11:03:58