19
Introduction
1
1.4 Display illustrations
Throughout this Reference Manual you will see examples of what the
display looks like. Any elements that are shown surrounded by a halo in
these examples flash in the display.
Example:
You have turned on the meter to perform a blood glucose test. In the
display you see the time and date plus the test strip symbol and the
drop symbol. The test strip symbol and drop symbol are flashing.
The time, date and blood glucose results shown in the display illustra-
tions are intended only as examples. The numbers will not necessarily
be the same as those shown by your own meter. The meter that is used
for illustration in this manual displays blood glucose results in mmol/L
(see Chapter 2.2) and has been set to 24-hour format (see Chapter 3.6).
Your meter, on the other hand, may show blood glucose test results in
mg/dL and/or be set to 12-hour format.
AC_CP_LCM_Manual_EN-UK final.indd 19_CP_LCM_Manual_EN-UK final.indd 19 20.6.2007 11:03:5720.6.2007 11:03:57
To Next Page
Loading...
Need help?
General
