123
Acoustic Mode
6
6.2 Beep tones during testing
Following the power-on beep and the 1 – 2 – 3 sequence of beeps, you
will hear the following while you test:
앫 a single beep when the meter is ready to test so you can let the test
strip draw up blood or control solution,
앫 a single beep when the test strip has drawn up sufficient blood or
control solution and the test is starting,
앫 several beeps each time the meter displays an error message (see
Chapter 6.5).
6.3 Announcement of the result following a test
In Acoustic Mode, whenever your meter displays a result following a
blood glucose test, it also announces the result as a series of beeps. The
result is not treated as an entity, but is broken down into individual dig-
its.
Examples:
앫 The result 7.6 mmol/L is announced as 0 – 7 – decimal point – 6.
앫 The result 138 mg/dL is announced as 1 – 3 – 8.
AC_CP_LCM_Manual_EN-UK final.indd 123_CP_LCM_Manual_EN-UK final.indd 123 20.6.2007 11:04:2720.6.2007 11:04:27
To Next Page
Loading...
Need help?
General
