132
Checking your meter
You now have about 5 minutes in which to draw up control solution with
the test strip.
Take a bottle of control solution.
Open it and wipe the tip of the dropper with a clean, dry paper towel
in order to remove any dried-on residues.
Invert the vial and hold it downwards at an angle. Squeeze it gently
until a small drop is suspended from the tip.
Apply the drop to the surface of a clean, easily washable object
made of glass, porcelain or stainless steel (e.g. a plate or spoon).
AC_CP_LCM_Manual_EN-UK final.indd 132_CP_LCM_Manual_EN-UK final.indd 132 20.6.2007 11:04:3020.6.2007 11:04:30
To Next Page
Loading...
