155
Blood glucose testing in a multi-patient setting
10
Correct
Drop of blood approx. 1.5 µL
Hold the meter with the test strip pointing downwards (see illustra-
tion).
Immediately after the drop of blood has formed: Hold the tip of the
test strip against the drop of blood so the black notch is touching
the drop of blood. The test strip draws up blood.
Move the test strip away from the drop of blood as soon as the
hourglass symbol
is displayed and the meter beeps (only when
the beep tone is turned on). The test strip has then drawn up enough
blood, and test starts.
When the result is displayed, hold the meter upright over a waste
bin and press the Test button to turn it off. The used test strip drops
out.
AC_CP_LCM_Manual_EN-UK final.indd 155_CP_LCM_Manual_EN-UK final.indd 155 20.6.2007 11:04:3620.6.2007 11:04:36
To Next Page
Loading...
Need help?
General
