39
Settings
3
When you turn the meter on for the first time, it has the following pre-
settings. These are factory defaults that you can change.
앫 Beep tone on, Acoustic Mode off
앫 Brightness of the display: medium
앫 Year: current year, e.g. 2007
앫 Time-and-date format: 24-hour format;
24-hour format is associated with the date format day-month
(DD-MM)
앫 Time: current time based on Central European Time
앫 Date: current date based on Central European Time
앫 Alarm clock function off
앫 Hypo indicator off
Notes
i
If the year, time and date settings were lost as a result of a bat-
tery replacement (see Chapter 9) and you fail to reset these, the
meter displays the time as 0:00 and the date as 0-00 (in 24-hour
format as well as in 12-hour format) when you perform a test.
In memory the results are saved not with the time and date but
with their memory location number (see Chapter 5.2). Without the
time and date the meter is not able to calculate averages, nor the
lowest and the highest values (see Chapter 5.3). Results sent to a
AC_CP_LCM_Manual_EN-UK final.indd 39_CP_LCM_Manual_EN-UK final.indd 39 20.6.2007 11:04:0320.6.2007 11:04:03
To Next Page
Loading...
Need help?
General
