Accu-Chek Performa Operator's Manual

9
Adjusting the Time and Date – First Time Use
The meter is preset with the time and date which may need to be adjusted to the local time zone. Setting
the correct time and date in the meter is important to review the results in memory or to download the
results to a computer.
1. Press and release to turn
on the meter. The time and
date appear on the display.
“Set‑up” and the hour ash. If
the correct time and date are
displayed, press and hold
to exit the set‑up mode.
2. Press and release
or to
decrease or increase the hour.
Press and hold
or to
scroll faster.
3. Press and release
to set
the hour. The minutes ash.
decrease
increase

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)