32
You are here
Setting the Time and Date
1. Press and release to turn on
the meter. The ashing test
strip symbol appears.
2. Press and hold for about
4 seconds to enter the set‑up
mode. “Set‑up” and the hour
ash on the display.
3. Press and release or to
decrease or increase the hour.
Note:
Press and hold or to scroll faster.
decrease increase
TIME / DATE
(hrs, min, day,
month, year)
BEEPER
(on/off)
TEST REMINDERS
(A‑1, A‑2, A‑3, A‑4)
HYPO ALERT
(off, on, level)
To Next Page
Loading...
